Full self-audit of the Citrine feature. Fixes found:
Robustness
- Probe now tries BOTH ws://127.0.0.1 and ws://localhost and routes to whichever
actually answers (probeCitrineEndpoints + CitrineProbeResult.url). We no longer
bet the whole feature on one loopback address form; useCitrine.url reflects the
winning endpoint so reads/writes go to the right place.
Correctness
- Preview toggle was mutating the REAL setting while in dev-preview; handleToggle
is now a no-op under preview (forced state owns the visuals).
Accessibility / "flawless" bar
- Respect prefers-reduced-motion: status pips, chip pop-in and the expand slide
now motion-reduce:animate-none (no looping glow/pulse for reduced-motion users).
- Recheck button gets an aria-label; status text is role="status" aria-live so
screen readers announce searching→detected transitions; decorative pips are
aria-hidden.
UX copy
- "Waiting" state no longer presumes Citrine isn't installed. Clearer two-step
guidance (Open Citrine → Start; come back → Recheck) covering the common
"installed but not started/detected yet" case.
Honest note: MIXED_CONTENT_ALWAYS_ALLOW (1.3.5) is the high-probability fix for
the 0-connections block but is not device-verified from here; the dual-endpoint
probe hedges the second most likely cause (address form).
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Citrine is running (listening on ws://127.0.0.1:4869) but the app can't connect
and shows 0 connections — a WebView-layer block, not our logic. To diagnose
without adb/USB, the probe now returns { ok, reason } capturing which stage
failed (blocked / connect-error / timeout-no-open / opened-but-no-nostr-reply /
closed-before-open with code), and the Settings card shows a small debug readout
(probe url + reason) whenever not connected. Purely additive; no behaviour
change to routing.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Self-audit of the 1.3.0–1.3.2 Citrine feature found two real issues:
1. False-positive detection (the important one). probeCitrine resolved true on
bare socket OPEN, so ANY process squatting on 127.0.0.1:4869 would be treated
as Citrine — and we'd then route reads AND published events at a non-Nostr
peer. The probe now completes a minimal Nostr handshake: open → send a bounded
REQ with a random sub id → require a protocol-shaped reply (EVENT/EOSE/CLOSED
echoing the sub id, or a NOTICE) before declaring the relay live. Non-JSON /
non-Nostr responses fall through to a clean timeout=false. A real relay
answers with EOSE in ~ms on localhost, so the happy path is unchanged.
2. Probe churn. The reachability query re-opened a fresh ws:// probe every 5 min
and on every window focus for the whole session — needless battery/wakelock,
and a localhost poke on every Amber round-trip. Now it only polls (30s) and
refetches-on-focus WHILE still waiting for Citrine to appear; once connected
it stops the background churn (a per-session local relay won't vanish
silently, and a failed read re-probes naturally).
Reviewed and left as-is (deliberate, safe): writing every kind to Citrine incl.
gift-wrapped DMs / Stash is intended on-device encrypted backup — all sensitive
kinds are NIP-44 encrypted before reaching the publish layer, so nothing
plaintext-sensitive is mirrored. Preview flag remains render-only.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
The CitrineCard is Android-only (renders null off-native), so its four visual
states couldn't be reviewed without an APK build. Adds a strictly cosmetic
preview switch:
localStorage.setItem('citrine:preview', '1') // show card, real behaviour
localStorage.setItem('citrine:preview', 'live') // force connected state
localStorage.setItem('citrine:preview', 'waiting') // force not-detected
localStorage.setItem('citrine:preview', 'searching') // force searching
localStorage.removeItem('citrine:preview') // back to normal
Safety: the flag unlocks RENDERING ONLY via isCitrinePossible(). It never sets
citrine.active and never yields a relay url, so no query or publish is ever
routed anywhere different — production relay behaviour is identical with or
without the flag. A forced state is purely visual (enabled/probing are derived
locally in the card for preview; the real probe still governs active/url).
lib/citrine.ts: citrinePreview()/isCitrinePreview() + CitrinePreviewState.
useCitrine: exposes `preview`. CitrineCard: forced state overrides the computed
state for review only.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Integrates Citrine (github.com/greenart7c3/Citrine), an Android app that runs a
full Nostr relay locally on the phone. Because it's "just a relay URL", it folds
into the existing useSkateRelays / nostr.relay() machinery with no new protocol.
What it buys SkateSpots:
- Instant reads: a localhost hit (~1ms) is queried first, remote relays run in
parallel and reconcile — every skate-content surface feels faster.
- Offline-in-the-field: reads work with no signal; writes land on-device and
publish to remote when connectivity returns.
- Resilience/backup: a durable local copy of the user's own events survives
public-relay outages and addressable-event eviction.
- Privacy: local-first data can lean on the device instead of public relays.
Design / safety:
- Android-only (Capacitor native + platform === 'android'); renders nothing and
never probes localhost on iOS/desktop web. Mixed-content ws:// is already
permitted via capacitor allowMixedContent.
- Opt-in only via config.useCitrineRelay (default off). No data is ever routed
through Citrine unless the user enables it AND a relay is actually reachable.
- Reachability probe (short-lived WebSocket) cached through react-query, shared
app-wide, re-checked periodically + on focus, with a manual Recheck button.
- When active, the local URL is prepended to reads and included in writes; the
read-relay set feeds getQueryKeySuffix so caches refetch automatically when
Citrine comes/goes.
- Encryption unchanged: Stash/DMs stay NIP-44 encrypted regardless of
destination — the Settings card states this explicitly. Local ≠ plaintext.
New: src/lib/citrine.ts, src/hooks/useCitrine.ts, CitrineCard in the Relays
settings screen. AppConfig gains useCitrineRelay (zod-validated, optional).
On-device verification still needed: confirm Android permits ws://127.0.0.1
cleartext to localhost (network security config) once Citrine is running.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
With Amber as signer, every nip44 decrypt is a foreground intent (visible
popup). Several hooks decrypt inside auto-running queries, so Amber flashed on
navigation/focus and (worst case) storms — one popup per encrypted event, and
polling queries re-fired every few seconds.
New helper isInteractiveSigner() (signerCapabilities.ts) detects the Amber
(x-amber) signer, where each crypto op prompts the user. Hooks now gate passive
decryption for interactive signers only; extension/nsec/bunker keep their
silent, live-polling behaviour.
Fixes:
- useCrewDismissals (GLOBAL via header NotificationBell — the main offender):
Amber users now use the instant localStorage mirror only, never passively
decrypt the synced list; disabled refetchOnWindowFocus + Infinity staleTime.
Dismissals still sync OUT on the write path.
- useDirectMessages (all 4 DM query hooks): added amberSafeQueryOptions() —
no background polling and no focus refetch for Amber (these decrypt up to
~200 gift wraps × 2 each); silent signers keep the 60s poll.
- useStash / usePrivateContacts: disabled focus refetch + Infinity staleTime
for Amber so the single decrypt runs once, not on every focus.
- useCordnChat: dropped the 5s live poll for Amber (was a popup every 5s);
silent signers keep it.
Scanned every signEvent call site: all are inside mutations/user callbacks
(zaps, invites, DMs, chat, follows, purchases, NIP-98 auth) — no passive
auto-signing anywhere. Deliberate user actions still prompt Amber as intended.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Root cause: the stock nostr-signer-capacitor-plugin (0.0.5) tries Amber's
background ContentProvider first, which GrapheneOS blocks and never returns,
with no clean fallback — so signing hung 90s and Amber never appeared.
Fix (matches Amethyst, the reference NIP-55 client):
- New native Capacitor plugin AmberIntent (android-templates/AmberIntentPlugin.java)
that goes STRAIGHT to a foreground nostrsigner: intent via a properly-registered
ActivityResultLauncher, tracks each request by id, and times out gracefully.
- MainActivity now registers the launcher in onCreate (AndroidX contract) and
hands it to the plugin, while staying a safe stock BridgeActivity (no
WebViewClient override → no black screen).
- inject-main-activity.mjs now installs both MainActivity.java and AmberIntentPlugin.java.
- capacitorAmberSigner.ts rewired to registerPlugin('AmberIntent'); every op is a
user-visible Amber Approve/Reject popup; rejections surface as a friendly message.
- Removed the dead npm nostr-signer-capacitor-plugin dependency (and its phantom
coracle fork spec) plus its vite external entry — signing no longer uses it.
- Delete flow copy updated to the new foreground UX (Approve in Amber / Cancelled
on reject) instead of the diagnostic SIGN/PUBLISH narration.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Fixes the audit findings:
HIGH-1 (NWC/WebLN auto-pay of unverified invoices): add assertInvoiceAmount and
call it before every programmatic payment in useZaps, useCrewZap, and
SpamFeePayment. A malicious LNURL/Lightning-address server can no longer return
an inflated invoice and drain the wallet — amount is decoded from bolt11 and must
match the intended sats (±1 sat), amountless invoices are rejected.
HIGH-2 (forgeable trust signals):
- useSasquatchPro: Pro is granted ONLY by a zap receipt AUTHORED by the
platform's Lightning provider, embedding a user-signed zap request that tags
the platform, with a real paid amount >= smallest tier. The self-signed
kind:32671 receipt is now advisory only and never grants access (closed the
"self-grant permanent Pro" hole).
- useFeaturedVerification: a listing is 'verified' only when the matching 9735 is
authored by the provider pubkey (not any self-published receipt).
- useCrewGoal: tally only invoice-backed (bolt11) zaps; the forgeable amount tag
is no longer summed, so goal progress can't be inflated with fake receipts.
Bump to 1.2.14.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Verified against the plugin's Java source: signEvent/nip*Encrypt/Decrypt
IMMEDIATELY reject with "Signer package name not set" when no package is
configured — which is exactly what my earlier "omit packageName" change caused,
and that rejection surfaced as the endless spinner on delete/accept/zap.
With the package set, the plugin tries the content resolver, and when that
returns null (permission not remembered) it falls back to
startActivityForResult(nostrsigner:) — the SAME native call login uses that
reliably opens Amber. Restore native plugin signEvent/nip04/nip44 with
setPackageName + AMBER_PACKAGE, reconstruct signature-only responses, and remove
the unused JS-intent bridge. Bump to 1.2.9.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Amber never appeared for delete/accept-invite/zap because Capacitor's default
WebView silently drops JS-initiated intent:/nostrsigner: navigations — the
request that opens Amber never reached the OS. Login worked only because it
uses the plugin's native startActivityForResult.
Add a custom MainActivity (android-templates/MainActivity.java) that overrides
shouldOverrideUrlLoading to launch intent:/nostrsigner: URLs via startActivity()
— a real native launch that opens Amber on GrapheneOS, matching login. Injected
into the generated android/ project at build time by inject-main-activity.mjs,
wired into android:build/sync/init. Simplify the JS launcher to navigate the
WebView (now intercepted natively). Bump to 1.2.8.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
The capacitor plugin's signEvent/encrypt query Amber's ContentProvider first,
which stalls on GrapheneOS and never launches Amber's approval UI — causing
delete, accept-invite, zaps, and every signing action to hang forever.
Add amberIntentBridge.ts which drives Amber through the reliable
intent:...scheme=nostrsigner flow (the same path login uses that actually opens
Amber), returning a promise resolved in-process via the org.skatespots.app://
deep-link callback (DeepLinkHandler → resolveAmberIntent). CapacitorAmberSigner
now routes signEvent/nip04/nip44 through this bridge instead of the stalling
ContentResolver path. Fast 60s fail-safe with a clear message instead of an
indefinite spinner.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
The likely real cause of "Amber never pops up, delete hangs" on
GrapheneOS: login only requested the get_public_key permission, so later
sign_event / encrypt / decrypt calls hit a per-action permission check
that routes through Amber's ContentProvider and stalls WITHOUT showing a
prompt. Now login pre-grants get_public_key, sign_event, nip04/nip44
encrypt+decrypt up front, so subsequent signing is a fast background
round-trip with no surprise permission stall.
IMPORTANT: existing sessions only granted get_public_key — users must log
out and back in once for Amber to grant the new permission set.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
ROOT CAUSE of "stuck on Deleting…" with no Amber prompt:
signEvent (and nip04/nip44 encrypt/decrypt) passed packageName to the
native plugin. With a packageName set, the plugin first tries Amber's
ContentProvider — a background, no-UI query that stalls on GrapheneOS and
never launches Amber's approval screen. So the user saw NO prompt and the
request timed out ("takedown taking longer than expected").
Login already worked around this by omitting packageName so the plugin
goes straight to startActivityForResult(nostrsigner:) which shows Amber's
UI. This mirrors that fix for every signing/crypto op: use the raw native
signer with NO packageName. Removed the now-unused getPlugin /
ensurePackageName / setPackageName machinery.
This is why deletes (and any signed action / encryption) never surfaced
Amber and hung.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
The community relay goskatespots.nostr1.com runs on relay.tools, which
implements the NIP-86 Relay Management API. As the relay owner/moderator,
an admin can genuinely remove an event from the relay's database via
`banevent` — unlike a NIP-09 kind:5 request that most relays ignore for
non-authors.
- New src/lib/relayAdmin.ts: NIP-86 JSON-RPC client with NIP-98 HTTP auth
(kind:27235 signed by the user's signer, payload hash included per
NIP-86). Includes banEventOnRelay + getRelaySupportedMethods, with a
CORS-proxy fallback for WebView contexts.
- useDeleteEntity admin path now also fires banEventOnRelay in the
background (best-effort, never blocks the spinner), so admin takedowns
actually erase the event from our own relay in addition to the kind:5
request, optimistic local hide, and cross-device kind:1985 label.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
DELETE HANG (real fix):
The admin takedown required TWO sequential Amber approvals (kind:5
deletion + kind:1985 hide label) and awaited both. On mobile the second
Amber prompt often doesn't resurface, so the button sat on "Deleting…"
until the 90s signer timeout. Now:
- Only the kind:5 deletion is awaited (the required action).
- The target is recorded in a local optimistic-hide store immediately, so
the app hides it on this device the instant kind:5 succeeds — no waiting
on a second signature.
- The cross-device kind:1985 label is fired in the BACKGROUND (not
awaited); a second approval, if needed, happens after the dialog closes.
- The whole mutation is wrapped in a 40s hard timeout so the spinner can
never hang indefinitely, whatever the signer/relay does.
- useAdminModeration merges the local optimistic set so hides are instant
and survive reload.
NOTIFICATION BELL UI:
- Brand-lime (#ccff00) glowing badge with ring, replacing the flat teal dot.
- Bell wiggles + soft glow pulse when there are unread items (new `wiggle`
keyframe).
- Gradient header with an icon chip, inline count, and a pill "Mark read"
button / "All clear" state.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Newer nostr-tools removed nip57.getSatoshisAmountFromBolt11, breaking
useZaps and useCrewGoal. Add src/lib/bolt11.ts (getSatoshisFromBolt11)
that parses the sat amount straight from the invoice's human-readable
prefix — no external dependency, immune to nostr-tools API churn — and
use it in both hooks.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Extends the admin-delete hang fix across the whole app. Audited every
signing route:
- Native (CapacitorAmberSigner): already fixed — computes id locally.
- Web/PWA (AmberSigner redirect flow): the callback handlers did a raw
JSON.parse(result), but Amber returns a BARE signature (returnType=
'signature'), so this threw or produced an event with an empty id that
stalls the relay — the same "stuck" defect as native. Added a shared
reconstructSignedEvent() helper that rebuilds the event from the stored
template + signature and computes the id via getEventHash. Applied in
both AmberCallbackPage and AmberCallbackHandler.
- NIP-17 DMs, zap requests, vouches, crew invites, membership, etc. all
sign via user.signer.signEvent and therefore inherit the fix.
- nsec / bunker / extension signers use Nostrify base classes (compute
ids internally) — unaffected.
- Native nip04/nip44 encrypt/decrypt are timeout-protected — no hang.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Compute event id locally in CapacitorAmberSigner.signEvent instead of
relying on Amber to echo it back. Amber (NIP-55) commonly returns only a
bare `signature` for kind:5 deletions and kind:1985 moderation labels,
leaving id empty — which failed the malformed-event check or emitted a
bad event that stalled the relay forever (the "stuck on Deleting…"
symptom). The id is a deterministic NIP-01 hash of the signed fields, so
we derive it ourselves, making signature-only responses work for every
kind including admin takedowns.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Two follow-ups to the Nostr-native newsletter (skipped auto-DM by design —
too spammy/fragile for now; the bell mailbox already covers the inbox feel).
Subscriber count (social proof):
- useNewsletterSubscriberCount tallies public NIP-78 subscription markers
(deduped per author, counting current "true" state).
- Shown under the subscribe CTA as "Join N+ skaters getting the drops",
hidden until it's meaningful (>=3) and rounded once it grows.
Archive backfill (consistency without losing the rich page):
- lib/newsletterArticle.ts converts a static NEWSLETTER_ISSUES entry into a
NIP-23 (kind 30023) article — structured sections rendered to Markdown,
stable slug `issue-N`, published_at from the issue date.
- NewsletterBackfillPanel (admin-only) diffs the static archive against what's
already on-relay and publishes only the missing issues; safe to re-run,
reports partial failures. The rich static page rendering is untouched.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Turn the static newsletter into a live, Nostr-native marketing channel that
npubs can subscribe to and receive in-app.
Publishing (admins):
- Newsletter issues are published as NIP-23 long-form articles (kind 30023)
tagged `skatespotsnews`, on the community relay.
- NewsletterComposer: admin-only dialog to write + publish an issue (title,
slug, summary, cover image, Markdown body).
Subscribing (any npub):
- useNewsletterSubscription: per-user opt-in stored as a NIP-78 (kind 30078)
marker, so it syncs across every device the user logs into.
- NewsletterSubscribeButton on the /newsletter page and issue reader.
Mailbox / notifications:
- New "News" tab in the NotificationBell showing all issues, with an unread
badge for subscribers (tracked via a per-account last-read timestamp).
Latest unread drop also surfaces in the "All" tab.
- Opening the bell or the /newsletter page clears the News badge.
Reading:
- useNewsletterIssues: queries admin-authored issues (author-scoped + tag +
admin re-validation as the trust boundary against spam).
- LiveIssuesSection on /newsletter shows issue cards linking to a reader.
- NewsletterIssueView: naddr reader (wired into NIP19Page for kind 30023) with
a small safe Markdown renderer, zap + subscribe CTAs.
Docs: NIP.md documents the 30023 issue schema, the 30078 subscription marker,
and the admin trust boundary.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Point CREW_AGENT_AVATAR at the intended Sasquatch artwork. Since it's the
single source of truth, this updates the agent's image everywhere (panel
header/rows/empty state, crew page button, CrewForm toggle) and in the
agent's published kind-0 profile.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Sasquatch now knows the crew it lives on. The agent is seeded with a rich
crew dossier — its own upcoming events, recent feed digest, roster size,
founder, open call, vibe, band, home spots, website/IG — and the system
prompt instructs it to answer crew-specific questions ("what's our next
jam?", "who runs this?", "what are we looking for?") directly from memory,
while still using CVM tools for wider-network discovery.
- useCrewAgentChat: expanded CrewContext + crew dossier + two-mode prompt
- CrewDetailPage: wires real crew events + feed digest into the agent ctx
- CrewAgentPanel: crew-specific suggestions, crew-aware copy
- Replaced 🐝 bee emoji with the Sasquatch mascot avatar everywhere
(panel header/rows/empty state, crew page button, CrewForm toggle)
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Close the metadata gap: the outer kind-4497 envelope was signed with the
sender's real key, so a coordinator/relay could see exactly who was talking.
- buildEnvelope now signs each envelope with a fresh ephemeral key (NIP-59
style) — the coordinator never learns the sender.
- Authorship moves inside the ciphertext: a new v2 sealed payload
(`nip44-group-v2`) carries a fully-signed inner author-proof event (kind 4498)
bound to the crew via an `a` tag. openGroupMessage verifies the signature,
author, content match, and group binding — so authorship stays unforgeable and
a proof can't be replayed into another crew.
- Transport trusts the verified v2 proof and surfaces the real sender; legacy
v1 envelopes remain readable (outer-key binding) for back-compat.
- NIP.md updated with the v2 format + an honest note on the residual
verbatim-replay caveat (full replay/forward-secrecy hardening lands with MLS).
Scope decision: kept to crew chat only. Regular 1:1/group DMs already use NIP-17
gift wrap (ephemeral keys, sealed per recipient) and have no coordinator, so
they need no change and stay idiot-proof.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Skaters can now request to join a Lab collective (studio/build team), mirroring
the crew join-request flow:
- New addressable kind 36387 (collective join-request), documented in NIP.md
- useCollectiveJoinRequests: send / incoming / "already requested" hooks
- Owner-only notification surfaced in the bell (All + Crews tabs) via
CollectiveJoinRequestCard, reusing the synced dismissal set
- "Request to join this collective" button on collective Lab profiles
(RequestToJoinCollective), hidden for the owner and existing members
Trust model preserved: only the owner can edit their own profile roster, so the
card links them to the member editor — no forged membership possible.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- New PaymentReadinessNote component: checks the logged-in user's Nostr profile
(kind 0) for a Lightning address / Silent Payment and either confirms "you can
get paid" or links them to Edit Profile to add one. Wired into CraftProfileForm
(coach, filmer, editor, photographer, builder, artist, graffiti, tattoo,
trainer, musician, judge) and the standalone coach/filmer/editor/photographer/
builder forms, alongside the existing CLINK (noffer) field. Lightning address
stays a single source of truth on kind 0 — never duplicated/stale per event.
- become-judge: removed the "Downhill / Longboard" event format (not part of the
skateboarding activities this app covers).
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Admins (the two pubkeys in src/lib/admins.ts) can now moderate any event:
- Post authoritative Event Updates (incl. cancel/reschedule) on events they don't own,
clearly labelled "Admin" and marked with an ["admin","true"] tag
- Take down any event (already wired via DeleteEntityDialog + isAdminPubkey)
SECURITY FIX: kind-7103 Event Updates are now only trusted from the event's host
(pubkey in the `a` coordinate) or a SkateSpots admin. Previously ANY npub could
publish a fake "CANCELLED" update — spoofing the detail-page banner and spamming
RSVPers' notification bells. Enforced in both parseEventUpdate() and
useActivityNotifications.
Note: admins intentionally CANNOT open the edit form on others' events — an
addressable event (31923) can only be replaced by the key that signed it; editing
under a different key would fork it, not edit it. Moderation is done via
authoritative updates + takedown instead.
Docs: NIP.md updated with the host/admin trust rule and the admin marker tag.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- Immersive EventDetailPage hero: full-bleed cover with legibility gradient,
bold uppercase title, type pills, host/music-act chips, and a 3-up meta bar
(date block · time · where). Past events render dimmed.
- EventCountdown: live status pill — "IN 3 DAYS" / "IN 2H 14M" /
"HAPPENING NOW" (pulsing) / "ENDED", refreshing every 30s.
- Actions (edit/calendar/share) moved into a clean glass overlay on the cover.
- Event sponsors: EventSponsor type + parse/serialize (mirrors TourSponsor),
EventSponsors "Presented by" strip (title sponsor hero row + logo grid),
sponsor editor on CreateEventPage, and sponsor preservation on edit.
- Document event sponsor tag in NIP.md.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- AttendeeList: tabbed Going/Interested with faces + names + a "who you trust"
signal (reuses batch trust scores); replaces the plain avatar stack
- Event Updates (kind 7103): usePostEventUpdate + useEventUpdates; host-only
composer with update/reschedule/relocation/cancelled categories that p-tags
every RSVPer so they get notified; public feed on the event page
- EditEventPage: auto-post a reschedule/relocation update to notify attendees
when the host changes time or location
- Activity bell: new 'event-update' notification type for RSVPers
- EventsPage: "Hosting" tab (logged-in) with a HostingDashboard listing the
user's upcoming/past events, live RSVP counts, and quick edit/update actions
- Document Event Update kind 7103 in NIP.md
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- New src/lib/routing.ts: keyless OSRM client, travel modes, distance/skate-time formatters
- New RouteDialog: self-contained Leaflet map drawing the route from the user's
location to a spot/shop/event, with a mode toggle and distance/time summary
- Wire the "Directions" buttons on Spot/Shop/Event detail pages to route in-app
instead of opening Google/Apple Maps
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Closes the admin/founder asymmetry without breaking the trust model: only the
founder authors the crew event, so only they add members — but an admin can now
publicly *vouch* for a join-request, and the founder ratifies with one click.
Protocol (SkateSpots-native kind 9087, regular event):
- e-tags the join-request, a-tags the crew, p-tags the requester (role
"requester") and the founder (so it hits the founder's bell).
- Clients keep only endorsements authored by a real admin of the endorsed crew
and dedupe one-per-admin-per-request (no credibility inflation).
- New parseCrewEndorsement + CrewEndorsement type; documented in NIP.md.
Hooks:
- useEndorseJoinRequest (admin publishes an endorsement, admin-gated).
- useJoinRequestEndorsements: batch-fetch endorsements for all visible requests
in ONE #e query, grouped per request, admin-verified per crew.
- useCrewNotifications attaches endorsements to each request entry.
UX (JoinRequestCard):
- Founder: primary becomes "Approve & add" when vouched, with a vouch strip
(stacked admin avatars + "Vouched by Rider +1 more") as social proof.
- Admin: the old dead-end "Only the founder can add members" becomes a real
"Vouch for them" action, then a "Vouched — waiting on the founder" state,
plus a one-line explainer so the path isn't a mystery.
- Endorsements enrich the existing request card (no duplicate notification).
Build clean, no console errors. Not deployed.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Crew roles previously covered only filmer/photographer/editor/artist plus
manager/og. Bring in the rest of the Lab professions so a crew can label any
member by the craft they bring:
- Added: coach, builder, graffiti, tattoo, trainer, musician, judge —
mirroring the Lab profession kinds 35001–35012 (with a `labKind` link in
CREW_ROLE_META for future cross-linking to Lab profiles).
- Kept the crew-specific manager + og, and preserved existing slugs so no
stored crew data breaks.
- Reordered for display: media crafts → Lab crafts → crew-specific.
- Aligned emoji with the Lab (📸🎓🔨🖌️💉💪🎵⚖️).
All consumers (CrewForm role chips, CrewLeadership, CollectiveMembers,
parseCrewRoles) pick these up automatically via CREW_ROLE_ORDER / _META.
Updated the crew-role docs in NIP.md.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Part A — Sponsor picker:
- CrewSponsorPicker searches the shop directory and emits a 30017 coordinate
so founders select a sponsoring shop instead of pasting a raw coordinate.
- Wired into CrewForm, replacing the raw coordinate input.
Part B — Notifiable join-requests (kind 31969):
- New addressable join-request event p-tagged to founder + admins, making the
request→approve direction symmetric with invites (surfaced in the bell, not
buried in a DM inbox).
- useCrewInvites: useSendJoinRequest, useIncomingJoinRequests,
useApproveJoinRequest (founder adds member), useDismissJoinRequest (local).
- CrewRequestToJoin now publishes the structured event.
- JoinRequestCard (Add to crew / Dismiss) wired into NotificationBell and
counted in the unread badge.
- Documented kind 31969 in NIP.md alongside invites.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
The crew coordinator is no longer just a pointer — when a crew configures one,
the Chat tab runs through it for real.
- src/lib/cordn: clean transport/crypto split so an MLS (ts-mls) upgrade is a
drop-in swap of the crypto layer only.
- types.ts: CordnMessage/CordnEndpoint + envelope kind 4497 + app tag.
- crypto.ts: sealGroupMessage/openGroupMessage — real NIP-44 group encryption
(per-recipient sealing), the exact seam MLS encrypt-to-epoch slots into.
- client.ts: buildEnvelope/publishEnvelope/fetchGroupMessages with per-group
cursor ordering and ciphertext→author sender binding (anti-spoof).
- endpoint.ts: resolve a crew's `coordinator` to a usable relay endpoint
(wss/ws direct; https falls back to the ContextVM relay).
- useCordnChat: fetch-then-poll hook mirroring the NIP-17 chat API.
- CrewChat: uses Cordn when the crew has a coordinator, NIP-17 fallback
otherwise; header badge shows the active transport (Cordn vs Private).
- CrewCoordinatorCard: reflects that private chat is live.
- NIP.md: document envelope kind 4497, delivery (fetch-then-poll + cursors),
the nip44-group sealed content, and the honest crypto→MLS seam.
Real encryption, real coordinator routing, non-breaking (fallback intact),
with the MLS ratchet as a clearly-marked next step.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
A skate team is more than "members" — the filmer, photographer and editor are
core functions. Crews can now assign optional, non-pretentious skate roles:
- Types: CrewRole (filmer/photographer/editor/artist/manager/og) + CREW_ROLE_META
labels/emoji, `crew-role` tag parser, and `crewRoles` on SkateCrew. Roles are
additive to membership and grant NO powers (only `admin` does); a member can
hold roles AND be an admin. Only honoured for founder/listed members.
- CollectiveMembers: optional rolesByPubkey → renders 🎥 Filmer / 📷 Photographer
flex chips next to each member.
- CrewLeadership: leader + captains show their skate-role chips.
- CrewForm: per-member role toggles + a founder ("Your roles") picker; publishes
`crew-role` tags scoped to the roster.
- CrewDetailPage: builds rolesByPubkey and threads it to members + leadership.
- NIP.md: document the `crew-role` tag + example.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
A skate crew is defined by its footage. Crews can now feature a headline video:
- videoEmbed.ts: safe parser accepting ONLY YouTube and Instagram URLs (full
parts on YT, clips on IG). Extracts video id / shortcode; rejects everything
else so we never render an untrusted iframe. No native/self-hosted video.
- CrewVideoSection ("The Part"): cinematic section — YouTube click-to-load
facade (poster + play button, no heavy iframe/cookies until play) and an
Instagram permalink embed, framed with skate language.
- SkateCrew gains `videoUrl` (tag `video`), validated through the embed parser.
- CrewForm: "The Part" input with live source detection (YouTube/Instagram) and
validation; publishes the `video` tag.
- Crews grid: crews with footage flex a "▶ Part" badge as a discovery signal.
- NIP.md: document the `video` tag (YouTube/Instagram only) + example.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- Extend SkateCrew with `sponsorRef` (sponsoring shop, NIP-15 stall coord) and
`coordinator` (Cordn/MLS encrypted-chat Delivery Service pointer), plus parser.
- CrewSponsorBanner: "Sponsored by [Shop]" banner that resolves and links the
backing shop; renders nothing if the shop can't be resolved.
- CrewCoordinatorCard: surfaces the crew's private-chat coordinator (E2E · MLS),
explains what the coordinator can/can't see, shows the operator, and prompts
the leader to set one up when absent — the UI foundation for Cordn chat.
- Wire the sponsor banner (under hero) and coordinator card (sidebar) into
CrewDetailPage.
- CrewForm: add "Sponsored by" and "Private Chat Coordinator" inputs with
validation; publish `sponsor` and `coordinator` tags.
- NIP.md: document the `sponsor` and `coordinator` tags, the structured invite
kind 36229 (with accept/decline flow), and the Cordn/MLS private-chat model
and why it's the chosen fit for crews.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- Upgrade CrewInviteDialog with a "Send invite" tab: invite a specific npub
with live invitee preview, optional note, and founder-only "invite as admin"
toggle. Preserves the shareable-link flow on a second tab.
- Add NotificationBell to desktop + mobile headers: unread badge, popover with
incoming crew invites (accept/decline) and pending-confirmation crews
(confirm with public/crew-only visibility).
- Wire useSendCrewInvite / useMyCrewInvites / accept / decline hooks and the
useCrewNotifications aggregator into the UI.
- Membership stays unforgeable (founder p-tag + invitee NIP-32 attestation).
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Keeps the skater directory fully open — NIP-05 is a trust signal, not a gate:
- Extract reusable NIP-05 verification into lib/nip05.ts (parse, fetch well-known, verify against expected pubkey); refactor useCrewNip05 to use it
- New useSkaterVerifications hook: batch-fetches kind-0 metadata for all skaters and verifies each nip05 resolves to its own pubkey, returning a Set of verified pubkeys
- SkatersPage: add a "Verified (N)" toggle (disabled when none verified) that filters to genuinely verified skaters; show ✓ badge only for truly-verified skaters; verified-aware empty state
- NIP19Page profile: nip05 line now reflects real verification (lime ShieldCheck + "Verified" pill when the handle resolves to the key, muted grey otherwise)
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Home spot:
- Add "Browse spots" button opening a searchable dialog of real mapped spots (useSkateSpots)
- Picking a spot stores its title + an `a` (30818:pubkey:d) coordinate; shows a linked-spot chip with unlink
- Profile page renders a linked home spot as a link to /spot/:pubkey/:identifier
- Parse homeSpotRef from the `a` tag; document in NIP.md
Profile pic consistency:
- Remove the skate-specific image override/upload — the skater card now always
uses the kind-0 profile picture so both sections show the identical photo
- "Profile Pic" section is read-only with a "Change profile photo" link to settings
- Drop the `image` tag from published skater events; note the change in NIP.md
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- Become-Skater form: photo section relabeled "Profile Pic"
- Level picker now includes a "Custom" toggle with a free-text input (≤40 chars) for labels like "OG", "Weekend Warrior", "Retired"
- Store custom level as a `level_custom` tag (mutually exclusive with preset `level`)
- Render custom level everywhere presets show: profile (NIP19Page), SkatersPage cards, SkaterDirectoryCard
- Document `level_custom` tag in NIP.md
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- New app-native Skater Profile kind 35000 with `skateskater` marker tag,
the anti-spam boundary that keeps generic kind-0 Nostr profiles out of the
directory (queried only from the community relay).
- Skater type, stance/style/level constants, and parser in types.ts.
- useSkaters + useUserSkaterProfile hooks.
- /skaters directory page: immersive hero, live count, search, style filter
chips, ranked skater grid with NIP-05 verification badges and lazy author
metadata.
- /become-skater opt-in flow (bio, photo, styles, stance, level, years, home
spot, location w/ geohash, socials).
- Wire "Skaters" into the mobile nav and a cross-link banner in The Lab so
plain skaters finally have a home.
- Document kind 35000 in NIP.md.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Editable in EditProfileForm and displayed on the profile:
- Bitcoin Lightning Address (lud16) — now editable in-form, shown with a
labeled Lightning row in the Info card.
- Bitcoin Silent Payment Address (BIP-352, custom `bitcoin_silent_payment`)
— validated (sp1…), shown as a copyable, truncated row.
- Sponsors & Support (custom `sponsors`) — freeform highlight, rendered in
a dedicated pink "Sponsors & Support" sidebar card.
- Cordn contact link (custom `cordn`) — private MLS messaging link
(cordn.net), shown as a "Message privately" row in the Info card.
Crews and the CLINK noffer tip button were already present, so they are
left as-is. Added isValidSilentPayment / isValidLightningAddress
validators and documented the custom kind-0 fields in NIP.md.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
- Flesh out SkateJudge as a full craft-based Lab profile (parseCraftBase),
with JUDGE_FORMAT / SPECIALTY / LEVEL label sets covering Game of S.K.A.T.E.,
best trick, jams, contests, am series, world tour stops, etc.
- Wire judge into useLabProfiles (union type, self-tag, parse case)
- Add "judging" ServiceType to LabPage: tab, accent, filter sections, empty
state, counts, profile card icon, and ?craft=judging deep link
- New BecomeJudgePage + /become-judge route + FAB entry
- CoachDetailPage renders judge profiles (accent, icon, labels, noun, title)
- Community Stats "Judges" card now links to /lab?craft=judging
- Document kind 35012 (skatejudge) in NIP.md
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
1. Map filter: renamed the "Bitcoin" toggle to "Spedn" (matches the toolbar
button); tooltip now says "Spedn your sats".
2. Community stats (/stats): useGrowthStats now queries the same relay set as the
rest of the app (community relay + user relays) via useSkateRelays instead of
only the single hardcoded SKATE_RELAY. Lab profiles / spots / etc. that live on
a user's own relay are now counted, so the numbers match what /lab shows.
3. Near Me on GrapheneOS: even after granting the OS location permission, the
WebView's navigator.geolocation stays blocked → "permission denied". Fixed by
fetching the position from the native Capacitor Geolocation plugin first
(LocationManager, honours the granted permission), falling back to
navigator.geolocation only if that fails. Also auto-inject
ACCESS_FINE/COARSE_LOCATION into AndroidManifest via the manifest script.
Bump version to 1.2.0 (versionCode 10200).
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Root cause found in the plugin's native getPublicKey (NostrSignerPlugin.java):
when a packageName is set, it FIRST tries Amber's ContentProvider (background,
no-UI). On GrapheneOS that cross-app ContentResolver query is blocked and never
returns, so it never falls through to startActivityForResult(nostrsigner:) —
the branch that actually opens Amber's approval UI. Result: eternal
"Waiting for Amber".
Fix: getAmberPublicKeyViaPlugin no longer calls setPackageName and no longer
passes packageName; it passes only the get_public_key permission. With no
package name the plugin skips the content-resolver branch and launches the
intent directly, opening Amber's UI. Amber returns both pubkey and its package,
so later signing still works. Paired with the auto-injected <queries> manifest
block so the OS can resolve the intent in the first place.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Two concrete root causes for the eternal "Waiting for Amber…":
1. setPackageName could hang forever on GrapheneOS. getPlugin() awaited it with
no timeout, so getPublicKey() (and its 90s timeout) was never even reached.
Now setPackageName races a 3s timeout and continues regardless — the Amber
package is passed explicitly on every call anyway, so it's non-essential.
2. AndroidManifest.xml had no <queries> block. On Android 11+/GrapheneOS the OS
silently blocks the nostrsigner intent without it, so Amber never opens. Added
scripts/inject-amber-queries.mjs (idempotent) and wired it into android:init /
android:sync / android:build so the block is guaranteed present in every APK,
surviving cap sync regeneration.
Bump version to 1.1.9.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
Root cause: LoginDialog and useCurrentUser detected the native app via
window.Capacitor, which is unreliable inside the WebView (false at mount / not
attached in some builds). So the ZapStore APK fell into the web intent:// redirect
flow and never opened Amber ("Waiting for Amber…" hang).
Fix: add isNativeAmberAvailable() in capacitorAmberSigner.ts using the imported
@capacitor/core Capacitor + native plugin presence, and use it (evaluated at
click time) in LoginDialog.handleAmberLogin and in useCurrentUser's signer
selection. The APK now calls getAmberPublicKeyViaPlugin() → native intent → Amber
opens directly, no redirects.
Bump version to 1.1.7.
Co-authored-by: shakespeare.diy <assistant@shakespeare.diy>
