The sheet tables carry 5-8 columns and were unusable on a phone: values were
truncated ("900" -> "90") and columns fell off the edge, and the cost-vs-quantity
table scrolled sideways.
- On max-width:639px the four data tables render as stacked cards (.ss-sheet-table
in index.css): thead hidden, each td a label/value row (label via data-label +
td::before), cells flex-wrap so a long label plus input never overflows.
- The cost-vs-quantity block is now a vertical list instead of a table, so it
never scrolls horizontally.
Verified at 390px: values are full and each row is a readable card.
- Remove the deckDesigner card from the DIY hub, so it is not listed publicly.
- Gate /diy/deck-designer to platform admins: DeckDesignerPage redirects to /diy
for everyone else and shows an "Internal preview" badge to admins.
Code and i18n keys are kept. To un-freeze, remove the Navigate guard and re-add
the card in diyGuides.ts (both noted in comments and AGENTS.md).
- The Client quote fields (15+ inputs) are now a collapsed <details>, so the
always-visible Margins card stays short; the chevron rotates on open.
- CalcSection buttons set aria-expanded.
- Every equipment/material/process/packaging row gains a duplicate (Copy) action.
- The sticky summary chip shows the order total when quantity > 1 and uses the
setup-inclusive cost.
- "List a deck at this price" passes a buyer-inclusive unit price (tax added on
top unless tax is marked inclusive).
A Simple <-> Advanced switch (not "Pro" — that name is Sasquatch Pro). Advanced
reveals four things a working shop needs:
- Per-operation labour rate (0 = shop rate) and per-operation scrap, which
compounds with the general scrap into an effective waste %.
- One-off batch setup (hours + cost), amortised over the order quantity, so the
unit price depends on qty; cost/board now uses the setup-inclusive unit cost.
- A tax / VAT line (inclusive or added on top), shown on the client quote as
Subtotal / Tax / Total or "includes X%".
- A cost-vs-quantity curve (1/5/10/25/50/100 decks).
All fields round-trip through CSV. The sheet is merged over DEFAULT_CALC on read
and clampPct is NaN-safe, so an old saved sheet or preset can't produce NaN;
currency switching also converts the new money fields.
A+B+C pass on /deck-cost.
A - Declutter: each sheet section is now an accordion (CalcSection) with its
live per-board subtotal in the header (Labor open by default, Margins always
visible), plus quick-start templates (Hobby starter / Small shop) that prefll a
realistic sheet.
B - Batch & trade: a quantity field (unit price vs order total), a wholesale
markup giving a wholesale/unit price, profit per deck, and a breakeven
(fixed / profit) with an optional target-monthly-profit goal. The client quote
shows "x N" and the order total; the deposit is taken on the total.
C - Guards: an amber warning block for markup < 1x, wholesale >= retail, rows
with 0 boards, fixed costs with 0 boards/month, no materials, equipment+overhead
over 60% of cost, and equipment spread over a single board; number inputs clamp
negatives to 0.
New state round-trips through CSV (margins rows). The default sheet produces no
warnings.
The arithmetic was already consistent, but three labels described something
other than what the code computes:
- "Overhead factor" multiplied labour only while a separate section held the
real overhead, inviting double-counting -> "Labour burden (x)" + a hint.
- "Labor cost" showed wage x burden, i.e. the loaded rate, not a per-board
cost -> "Loaded rate".
- "Profit margin (x)" was a markup -> "Markup (x)", with the implied gross
margin % shown so the name matches the number.
Also: distinct board-count columns (Lifetime boards / Boards per order /
Boards per run) instead of three identical "# boards"; "Scrap / waste (%)".
PDF and Markdown exports use the same names. CSV machine keys are unchanged so
existing exports still round-trip.
QuoteProfile gains payment methods (multi-select chips), a deposit percent
(PDF splits "Deposit due now" / "Balance on completion"), free-text payment
terms, separate payment details (bank/PayPal), and an optional Incoterm
(EXW/FCA/DAP/DDP). The client PDF gains a payment block; the PNG shows the
deposit. Quote state is now merged over DEFAULT_QUOTE on read so a quote saved
before a new field existed cannot crash the tool.
New /diy/deck-designer tool. src/lib/deckDesign.ts holds the pure geometry
(outline, waist, rounded ends, kicks, concave) and the exporters; the component
renders a live top view, side profile and concave section with presets, saved
locally.
Exports: true-size SVG, a tiled 1:1 PDF (A4/Letter, split across sheets with
corner registration crosses), and an R12 DXF (outline polyline + 3/16" truck
holes + centreline, $INSUNITS=4). Truck patterns: New school 53.975x41.275 mm
and Old school 63.5x41.275 mm.
Deliberately 2D: this is the outline a builder traces and cuts, not a SK8CAD
clone (SK8CAD is proprietary; only its JSCAD engine is MIT, and we copied
nothing).
The Quote details block gains NIP-05, npub and a Lightning address (lud16), plus
a "Fill from profile" button that autofills name/website/NIP-05/Lightning/npub
from the logged-in kind-0 profile. The client PDF lists the NIP-05 and npub in
the contact block and "Pay via Lightning: <lud16>" under the total; the PNG shows
the NIP-05 (or npub) under the business name. A PDF is a snapshot — the identity
is verifiable on Nostr, not on the paper.
- Extract the client-quote identity into its own store (QuoteProfile,
skatespots:deck-cost:quote) so it is NOT part of CalcState — loading or saving
a preset now keeps the same business name/logo/contact details.
- Client quote PDF: a real quote number counter (Q-0007, with a +1 button) and a
configurable validity window, shown as "Quote valid until <date>".
- PNG summary card now also draws the logo (top-right) and the business name.
A "Quote details" block (in the Result section) lets the user set a business/
shop name, a logo (stored as a data URL — no upload/network, capped 500 KB),
email/phone/website/address and notes/terms. The client quote PDF now renders a
logo + contact header, the line item + total, and the notes/terms. Bumped the
localStorage key to :v2 (and guarded preset/JSON loads) so an older saved sheet
without the quote block can't crash the tool.
Export ▾ now offers: PDF (full sheet), PDF (client quote — uses an optional
businessName), PNG summary card (canvas), XLSX multi-sheet workbook (lazy
SheetJS), CSV, Markdown, JSON, and Copy summary (clipboard).
Import auto-detects the CSV shape: a `name,order_cost,…` header is treated as a
supplier price list and replaces the Materials table; otherwise the CSV
round-trips the whole sheet. JSON still loads a backup.
- Export is now a menu: PDF (quote/print), CSV (spreadsheet-friendly
section,item,field,value rows), Markdown, JSON (backup).
- Import auto-detects .json / .csv: JSON loads a backup, CSV round-trips the
whole sheet (hand-rolled CSV quote/parse so commas in material names are safe).
- Currency picker now offers BOTH Bitcoin units — ₿ sats and ₿ BTC (plus fiat).
BTC is 1 per BTC, sats 1e8; switching converts between them and fiats
(BTC shows up to 8 decimals, trimmed).
- Default Materials is now a complete deck-build checklist, grouped: wood & core
(veneer/edge tape/logs), adhesives & fillers (glue/epoxy/filler), press/mold
consumables (release/vacuum film), shaping (sandpaper/saw+drill bits/masking
tape), finish & graphics (stain/primer/paint/clearcoat/grip) and Other. New
rows default to 0 so the worked example is unchanged.
The first pass overflowed the right margin (long value strings), had no section
separation, and split the Result across pages. Rebuilt the generator:
- accent rule + title, date/currency subtitle;
- each section gets a lime underline + a hairline rule;
- rows are two-line items (name + per-board value, then a grey detail line with
cost/boards/setup), so nothing runs past the margin;
- Result section is kept together (page-break guard) and the two selling prices
render in highlighted boxes;
- page numbers (n / N).
The toolbar's primary Export now generates a real PDF (lazy-loaded jspdf) — a
formatted one-page summary: labour, equipment, operations, materials, processes,
packaging, margins and the selling prices, plus the date/currency. Print-to-PDF
was rejected because window.print() doesn't work in the Capacitor WebView.
A secondary JSON export stays (for Import/backup); Import still reads JSON.
jspdf is dynamically imported so it never enters the initial bundle.
- Equipment now amortises setup time too: (cost + setupHrs × labor/hr) ÷ boards,
so the Setup (h) column actually does something.
- sats values round to whole numbers on currency conversion.
- Each section shows a per-board subtotal (equipment/materials/processes/packaging).
- Sticky summary bar (under the header) keeps cost + selling price visible while
you edit.
- Save/Load named presets (localStorage) + Export/Import JSON; Reset now confirms.
- Results gain "List a deck at this price →" (deep-links CreateListingPage with
?price¤cy, which now reads currency too) and "Get it made →" (Lab Builder).
Coinbase's exchange-rates response includes crypto (BTC, ETH, USDT, …). Filter
the picker to ISO-4217 fiat codes (FIAT_CODES) plus sats, so only real
currencies and bitcoin are selectable.
- getBtcRates()/useBtcRates() read every BTC→fiat rate from the ONE Coinbase
exchange-rates call the app already made, plus sats (1e8). No new endpoint.
- The calculator's currency control is now a searchable Popover: sats + every
fiat Coinbase reports, with a search box. Selecting a currency CONVERTS every
money field (labour, rent, utilities, subscriptions, equipment cost, material
order/shipping, packaging materials) by the live ratio; unitless fields
(overhead factor, board counts, minutes, margins) are untouched. Falls back to
relabel-only if rates aren't loaded.
- Currency symbols/formats for the common fiats.
A chip row at the top switches the whole sheet's unit: $ / € / £ / ₿ sats. Input
labels follow the unit and results reformat (sats are shown rounded, no
decimals). It relabels/reformats only — it does not convert values, since the
app only has a BTC/USD rate (no fiat↔fiat or reliable fiat↔sats conversion);
you enter amounts in the unit you think in. Choice persists with the rest.
- Removed the sticky category-chip row from /diy (sections still group the cards).
- New in-app tool at /diy/deck-cost (components/DeckCostCalculator.tsx): a
self-contained pricing model — labour rate + overhead, equipment amortisation,
operation expenses, materials (with order/unload time), process time,
packaging, profit margin and scrap → cost per board and a fair selling price
(no-packaging / with-packaging). State persists to localStorage; reset to the
worked example. The "Deck cost & pricing" card now links to it instead of
showing "Coming soon".
- Smoke test walks /diy/deck-cost.
Reworked the DIY hub per feedback: point at our own app sections where we have
relevant content, and render the topics we don't cover yet as unclickable cards
with a "Coming soon" badge — no external links.
- Live internal cards: Map your DIY spot (/create-spot), Buy parts & gear
(/marketplace), plus the "Do it with people" actions (Builder, crews, spot,
listing, coaching).
- Coming-soon cards: deck building, SK8CAD, cost/pricing, ledge/box, quarterpipe,
flatbar, concrete basics, coping, regrip, bearings/trucks, 3D-printed molds,
mold tools.
- Dropped external URLs/sanitizeUrl from the page; updated the footer copy.
New /diy hub: curated resources for making your own gear, with cross-links into
the rest of the app.
- src/lib/diyGuides.ts: seed data — categories (Boards, Ramps & wooden
obstacles, Concrete & DIY spots, Repairs & tuning, Tools & plans), resource
cards (Open Source Skateboards / SK8CAD / Instructables / YouTube), and an
actions block (find a Builder, find a DIY crew, map a DIY spot, sell builds,
find a coach).
- src/pages/DiyPage.tsx renders it (category chips + card grid + actions);
external links go through sanitizeUrl and credit the source.
- Route /diy (lazyWithRetry) + a nav-catalog entry (id diy) so it appears in the
desktop "More" menu and the mobile burger; also linked from the site footer
and the map links strip. Smoke test walks /diy.
The desktop footer is hidden on full-bleed map routes, leaving the
Newsletter/License/Privacy/Collaborators links (and the "not sponsored by
OpenSats" note) unreachable from the homepage. MapFooterStrip overlays them
inside the map container without stealing map height:
- Desktop: a slim full-width bottom bar.
- Mobile: a tiny collapsed "Links" chip that expands to a compact, scrollable
row.
- Dismissible (useMapFooterHidden, device-local, same-tab synced) and
restorable from Settings -> Appearance.
- The map's OSM attribution moved up (md:bottom-7) so the bar doesn't cover it.
The admin "It's Monday — write the drop" card was pinned at top-20 on every
route, so on the map it sat on top of the top-right toolbar (Add Spot / Weather
/ More). It now drops below that toolbar on the map routes (top-40) while other
pages keep top-20, and the dismiss button is a proper compact target.
The "Select Content to Delete" dialog was broken on mobile:
- Filter pills had no flex-shrink-0, so they squashed and their labels overlapped
("All (504Spots (Shops…"). Added shrink-0 + min-h-0 so the row scrolls cleanly.
- The global mobile `button { min-height:44px }` rule inflated the checkboxes
into giant squares. Added min-h-0/min-w-0 (and an explicit h-4 w-4).
- The per-row delete on Recent Activity was hover-only (invisible on touch);
it's now always visible on mobile and compact.
Addressable events (30818/30017) are author-signed, so "transferring" them
means re-signing each under the destination key + publishing, and optionally
publishing NIP-09 deletes for the originals. This script does that; it needs
TO_NSEC (destination) and, only for --delete-originals, FROM_NSEC. --dry-run
(default) needs no keys and just lists what would move.
The /lab profile card and /stats Top Mappers were overflowing off the right
edge: Tailwind `grid md:grid-cols-2` (no base column) renders one implicit
`auto` track on mobile that can exceed the container when a name is long, so the
whole card got pushed off-screen. Added the base `grid-cols-1` repo-wide (plus
`min-w-0` on truncating flex/grid children).
/stats also gained a "Top Shops — most shops added" leaderboard (kind 30017)
beside Top Mappers (spots): `topShops` in useGrowthStats, a generalized
MapperRow (count + unit), and EN/ES copy. PERSIST_BUSTER → v6 (new persisted
field).
- useEscrowPrefs (device-local): default lock window, preferred escrow mint,
require-escrow default for new listings.
- EscrowSettingsCard on the Wallet (native-only, beside EscrowKeyCard).
- EscrowRequestDialog now defaults its lock window + funding mint from the prefs.
- Listings gain an optional ['escrow','required'] tag: a toggle on
CreateListingPage (defaulted from the pref) and a 🔒 badge on the card.
- Restore the always-on blink/pulse (still motion-reduce:hidden for a11y).
- Drag the bubble off the left edge to hide it; a tiny left-edge tab brings it
back. (The ✕/panel/Settings Hide paths remain.)
- Replaced the cramped inline "Go Pro" header pill with a clean full-width
strip at the top of the panel body.
Sasquatch (the look regressed): I over-corrected last pass by shrinking the
bubble on the map and bolting an always-visible ✕ over the avatar on mobile.
Restored the full-size bubble + glow on every route (the map only loses the
pulse), moved Hide to a desktop-hover ✕ and an EyeOff "Hide assistant" button
in the panel header (Settings → Appearance still re-enables it).
Mints: the add-mint dialog only offered a hand-picked "Recommended" shortlist.
It now also lists the full searchable MintRadar directory (useMintDirectory)
below the recommendations.
Events: CreateEventPage could only link a skate spot. Added an optional
"Link to a Shop" picker (useSkateShops, search, location autofill) that writes
['a','30017:…'] + ['venue-name', …].
- The wallet status bar (Cashu/WebLN/NWC pills + Manage) was a rigid
justify-between row that pushed the Manage chip off the right edge on phones.
It now wraps, with Manage right-aligned (ml-auto), so it stays on screen.
- The escrow card copy was jargon ("advertise a public key ... if the deal falls
through"). Reworded seller-facing: "turn on escrow ... a buyer can lock their
sats to you ... you release them when you deliver — if you don't, the buyer can
reclaim them after the agreed time." EN/ES.
One discoverable home for every paid extra, so the pricing model is legible
instead of scattered across the Sasquatch panel and each offer form:
- components/ProSupportScreen.tsx (Settings ?section=pro + a menu row): honest
"prepaid, not a subscription" framing; Sasquatch Pro status (days left) +
PRO_TIERS with per-day sats and a Go Pro / Extend button; Featured placement
(PLATFORM_FEES x DURATION_TIERS with per-day + best-value); your currently
featured Lab listings (featuredUntil); and the free paths (PoW listing, free
AI FAQ).
- Distinct naming in copy: Sasquatch Pro (AI) vs Featured placement (visibility).
- Smoke test now walks /settings?section=pro.
Addresses "the floating Sasquatch flashing is annoying":
- Pulse is now state-driven: the animate-ping halo shows only when there's an
unread tip (message), never perpetually; the unread dot matches.
- Honors prefers-reduced-motion (motion-reduce:hidden).
- Map-aware: Layout passes isFullBleed, so on the map the bubble runs compact
(smaller, no glow, no pulse) instead of competing with map controls.
- Hideable: a ✕ on the FAB hides it (useSasquatchHidden, localStorage
sasquatch-hidden, same-tab synced via an event), with a "Show Sasquatch
assistant" toggle in Settings → Appearance to bring it back.
